A way to remove some of the danger of tuning the engine is to buy a relocating kit for the carburetor needle.

The needle valves can be supplied with a number of different operators

Needle valves are often designed with a metal needle (generally brass, bronze, or stainless or other alloys of steel) and an elastomeric seat (generally PVC, CPVC, PTFE, or a wide range of brand name

The needle valve is also placed in the bypass of the turbine inlet valve. That valve is normally butterfly or spherical type and not prepared to open against all column water pressure.

Needle valves are usually used in flow metering applications, especially when a constant, calibrated, low flow rate must be maintained for some time, such as the idle fuel flow in a carburetor.

needle valve-GMJ11F/H-25 high sealing sampling valves

needle valve drive is to use external power open and close the needle valve of the device. The purpose of using the drive is to make the effort to facilitate the operation of the valve

As you close the high-pace needle valve, the engine will begin to run smoother and the RPM's will rise.