I am looking at putting a kuryakyn air scoop on my harley because I absolutely love the look of butterfly valves, and the one I found on eBay says the following regarding fitment: The Pro-Series Hyp

Hydrocyclone separator Including Desander and Desilter. They are second and third phase of solids control system. For Desilter hydrocyclone it mainly separate particles sized 15~20 microns minimum.

1, open and close without friction. This feature is completely solve the traditional valve sealing surface due to impact of friction between the sealing problem. 2, the coat-style structure. On the va

Zone control valves are drip irrigation valves that turn on and off water to the drip tubes (or hoses). Often these valves are automatically turned on and off by an irrigation controller/timer. For a

Operating positions for two main-port valves could be either shut (closed) to ensure that no flow in any way undergoes, fully open for max flow, or sometimes partially open to any degree involving. S

The double block and bleed valve is also called DBB valve, generally speaking, it is make up by two ball valve and one neddle valve or two ball valve and a globe valve.

A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both e

Instead of the plain old drain plug, there are other fancy ways to do the oil change. If your car is well maintained, meaning if you change oil frequent enough, there