Application:Offshore race/pleasure boat,BBC,800-1300HP @6-7000 RPM,engines are well built w/details available. Problem:As these engines are used for pleasure, 92-93 octane is used

I have a manual dry standpipe, it's the only one I've ever done in my life the reason being most jurisdictions I've worked in never allowed dry manual standipipes, and I just got approved drawings bac

I need to size a needle valve that is placed before a flow transmitter on the lube oil inlet line to a bearing. I know the amount of the flow thru this line (1.9 gpm) and also the model I need to choo

I have a 500 cc motorcycle engine that runs on methanol. I only want to run the machine a shows so is it possible to convert it to run on petrol,as it will never be racing.The compression is 15:1 igni

The facility that I work at requires valve guide wear to be measured before and after engine testing is performed. One of my co-workers does this procedure and using a digital dial bore gauge with a s

I'm about to design piping system inside oil production wellhead. Around 5 meters from Xmass tree I'll arrange a choke valve. My concerns is dealing with supporting this choke valve. I'd like to know

I am considering making my own distilled water misting system ahead of my condenser/compress unit to get more cooling power out of it.

I have heard of three alternate methods (vs the traditional one consisting of allowing 50 to 25% of the system frictional pressure drop excluding itself to the control valve) to determine the allowabl