Needle Valve Series

Product drawing»

Structural drawing»

You are here: News > News Detail

Detroit 4-53 diesel engine injectors

2010-11-17

we have a 4-53 diesel engine i am not much of a diesel person, but this thing has a miss/ low power it is in a log skidder, i was wondering how to test the injectors this is what the owner suspects.

The injectors have to come out and be tested with the appropriate test rig/ball vavle.  Get a manual, the injectors aren't that hard to remove, but you can mess up the timing (which is essentially controlled by the "lash" between the injector and rocker arm) when you reinstall them.  Find a qualified shop to test them.

The injectors have to come out and be tested with the appropriate test rig.  Get a manual, the injectors aren't that hard to remove, but you can mess up the timing (which is essentially controlled by the "lash" between the injector and rocker arm) when you reinstall them.  Find a qualified shop to test them.


MORE NEWS

  • Best Design for an Outside Steam Vent
  • A better understanding of psia vs. psig
  • I need a sealant that will cure underwater.
  • need help building a tuned intake for inline six
  • Shanghai MeiYan Yi Pump & Valve Co., Ltd.
    MeiYan Yi needle valve Contact MeiYan Yi
    Shanghai Enine Pump & Valve Co., Ltd.
    Enine needle valve Contact Enine
    Shanghai Saitai Pump & Valve CO., Lid.
    Saitai needle valve Contact Saitai
    Shanghai Fengqi Industrial Development Co., Ltd.
    FengQi needle valve Contact FengQi