Needle Valve Series

Product drawing»

Structural drawing»

You are here: News > News Detail

Level bridle design on 450# steam drum

2010-11-03

I need some clarification regarding requirements on level bridle isolation valves.

ASME Section 1 Steam Drum.

My current configuration has double isolation between the drum and water column.  One valve is a quarter turn ball valve and the other is a gate valve.  The ball valve was added two or three years after original construction.  I don't have much info on this valve.

I've always used gate valves for this purpose and globes for blowdown.  Does this ball valve meet code?

Our standards allow no 1/4 turn valves on or near our boilers.  If I recall correctly all other valves associated with ancillary equipment are globe or needle vales. Only the larger valves a gate valve and above a certain size have to have a built-in bypass or warm up configuration.


MORE NEWS

  • (reveiw) Hydraulic System with tandem center solinoid for control
  • Cheapest way to measure water depth
  • Water-powered control valve for water play structures
  • Return
  • Shanghai MeiYan Yi Pump & Valve Co., Ltd.
    MeiYan Yi needle valve Contact MeiYan Yi
    Shanghai Enine Pump & Valve Co., Ltd.
    Enine needle valve Contact Enine
    Shanghai Saitai Pump & Valve CO., Lid.
    Saitai needle valve Contact Saitai
    Shanghai Fengqi Industrial Development Co., Ltd.
    FengQi needle valve Contact FengQi