Needle Valve Series

Product drawing»

Structural drawing»

You are here: News > News Detail

needle valve body

2012-04-12

1.Needle Valve and valve seat contact surface attachment of a foreign body.
Reason: the needle valve and the valve seat is control the oil feeding amount, the sealing of the stringent requirements, contact surface smoothness high. Such as the contact surface attachment of a foreign body, will cause the needle valve and valve seat sealing, leakage. Foreign body mainly refers to the impurities in gasoline and condensation of glioma. In order to avoid this kind of failure, the user should pay attention to regular cleaning gasoline filter and use good quality gasoline.
Elimination: according to the carburetor cleaning method.

2. Needle Valve wear
Reason:
1)the needle valve in use process due to impurities in gasoline erosion and in contact with the valve seat wear .
2)The float buoy ends of balance, to drive the needle valve side stress and wear. Needle valve seat wear cause and untight sealing and leakage.
Elimination:
1)replacing the needle valve, and users should pay attention to regularly clean the fuel filter and the use of good quality gasoline.
2)Replacing the needle, while adjusting the float buoy ends are positioned on the same horizontal plane.

More related products of valves

Ball Valves

Check Valves

Gate Valves

Butterfly Valves

Globe Valves

Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi needle valve Contact MeiYan Yi
Shanghai Enine Pump & Valve Co., Ltd.
Enine needle valve Contact Enine
Shanghai Saitai Pump & Valve CO., Lid.
Saitai needle valve Contact Saitai
Shanghai Fengqi Industrial Development Co., Ltd.
FengQi needle valve Contact FengQi