Needle Valve Series

Product drawing»

Structural drawing»

You are here: News > News Detail

Needle valves are used to control flow into delicate gauges

2012-05-22

A Needle Valve has a long tapered point at the end of  the  valve  stem.  The  long  taper  of  the  valve  element  permits a much smaller seating surface area than that of the Globe Valve; therefore, the needle valve is more suitable as a throttle valve. Needle valves are used to   control   flow   into   delicate   gauges,   which might be damaged by sudden surges of fluid under pressure. Needle valves are also used to controlthe end of a work cycle, where it is desirable formotion to be brought slowly to a halt, and at otherpoints  where  precise  adjustments  of  flow  arenecessary  and  where  a  small  rate  of  flow  is  desired.Although  many  of  the  needle  valves  used  influid  power  systems  are  the  manually  operatedtype , modifications of this type of valveare often used as variable restrictors. This valve isconstructed without a handwheel and is adjustedto provide a specific rate of flow. This rate of flowwill  provide  a  desired  time  of  operation  for  aparticular subsystem. Since this type of valve can be adjusted to conform to the requirements of aparticular system, it can be used in a variety ofsystems. A needle valve   was  modified  as  a  variable  restrictor.

More products of valves

Ball Valves

Butterfly Valves

Plug Valves

Forged Steel Valves

Water Pump Control Valves

Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi needle valve Contact MeiYan Yi
Shanghai Enine Pump & Valve Co., Ltd.
Enine needle valve Contact Enine
Shanghai Saitai Pump & Valve CO., Lid.
Saitai needle valve Contact Saitai
Shanghai Fengqi Industrial Development Co., Ltd.
FengQi needle valve Contact FengQi