Basic series of liquid chlorine Q41F46 ball valve type, can be divided on points (two) two-and three-piece ball and have a general structure with the fluid resistance of the small, open and close fa

Hello well I

.Knife gate valve must have periodic maintenance. Do not allowed the collision and compression to influence the sealing. Ball valve

indexing valves are a single valve unit purposely installed to control several valve zones. Usually available in models with or without a built-in anti-siphon device, it requires a special controller

I'm doing a project on driving a solenoid valve in BOSCH. The input is a 0-10V sine wave (Which is actually an output from a D/A converter) and it is to be converted to a PWM signal of 300Hz with 0-1

When system pressure at the check valve inlet port is high enough to overcome the biasing spring force on the poppet, China globe valve the poppet is pushed off its seat allowing oil to flow through t