You are here:
News
News
Shireen said cheerfully and it between the he was playing2011-07-20
Shireen said cheerfully and it between the he was playing and subsequently one. Christ, they cram so some of these
things in here you
hardly got room to create a glass. But then, Grady
remembered u
This valve is design to relieve the excess pressure2011-07-14
This valve is design to relieve the excess pressure from the boiler
in case of a build up of extra pressure in the boiler. The extra
pressure can come from a number of different things. A few of the
Bolts connect with every position should be uniform tightened2011-07-13
Must inspect the valves cave and sealing surface before installation. Not allowed the dirt or sand attachment.
2. Bolts connect with every position should be uniform tightened.
3. Check the packing a
Pneumatic ball valve before and after the pipe line is ready2011-07-12
Pneumatic ball valve before and after the pipe line is ready. Before and after the pipeline should be coaxial, the two should be parallel to the flange sealing surface. Pipeline should be able to with
Plastic products also include2011-07-11
Electronic equipments and cases: Plastic products also include
various types of electronic equipments and its cases. Since these
products are known for its toughness and gloss, it can be used as
el
The purpose of a steel gate valve2011-07-07
The purpose of a steel gate valve is to stop the flow
of liquid; usually in an emergency. You will find a steel gate valve
installed in many things. The most common is found on your outside water
spig
Butterfly valves on water lines2011-07-05
Butterfly valves on water lines should be manually operated only through
a
geared mechanism to prevent slamming
the most common type of gate valves2011-07-04
Water faucets are very common in our daily life, I suppose. They are
generally used to shut off the water by lifting and dropping the
wedge. In fact, water faucet is the most common type of gate valv