You are here:
News
News
Yamaha Vst Needle Valve2010-12-16
How do I change this thing out. Figured out my fuel issues, got the motor to run but vst tank will not keep up with hp pump.
Carb/throttle needle valve adjustment2010-12-15
What's a good starting point for throttle needle valve for the first start and the break-in period? I'm finally about to get my Zoom 80/66cc going for the first time and want to minimize the initial h
48 Cav Needle Valve of No-Cutting PET Preform Moulds2010-12-15
Karman Industries, A. Capacity of Research and DevelopmentDemars company has a powerful team for research and development, which is capable of manufacturing the perform molds with one cavity to ninety
Float needle interchangable2010-12-15
Flooding but not flooding enough to dump out of the float bowl overflow tubes? Most of the time those float valve needles are okay.
Centrifugal Compressor Confusion2010-12-14
Centrifugal compressors want a pretty steady suction pressure and a pretty steady discharge pressure. That is because they'll only do about 2.5 compression ratios per stage. Consequently I don't rec
pumps outside in freezing conditions2010-12-14
Can anyyone share tips on installation of pumps outside in freezing conditions. We are looking at using vertical turbine pumps to be installed outside, pumping the water from the tank intermittently.
dry sump oil separators2010-12-14
The engine is a V-twin with a dry sump oil system. The engine crankcase is basically sealed
and runs at between 5 and 10 inches of vacuum generated by the scavange pumps.
The breathing to atmosphere
Eductor flow back pressure2010-12-14
I have a slurry mixing package which has been installed such that the EDUCTOR discharge has to overcome a back pressure head of 25 ft before entering the tank destination.